Samsung MultiXpress K4 Series Service Manual Download Page 281

Page: 281 / 526

4. Troubleshooting

•

Diagnostics > Adjustment > Print Adjustment > Image Position

Purpose

Manually adjust printed image position on paper in print engine

Operation Procedure

1) Select a tray required adjustment.

2) Change the adjustment value with ”+”, “-” then press “OK” button to save changes.

•

Simplex Leading Edge

•

Simplex Side Edge

•

Duplex Leading Edge

•

Duplex Side Edge

NOTE

•

Adjustment must be done for each tray (tray1, tray2, tray3, tray4, MP).

•

It is recommended not to choose “ALL” for tray selection.

•

It is always better to adjust for a particular tray at each time.

3) Print out the test pattern and check if the image is moved as you want. If not, repeat stpe2.

•

Diagnostics > Adjustment > Print Adjustment > Print Test Patterns

This menu is to print out the test pattern manually.

4-46

Summary of Contents for MultiXpress K4 Series



























































































































































































































































































































































































































































































































Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Brands by name

Popular brands

Samsung MultiXpress K4 Series, Service Manual

Search results

Summary of Contents for MultiXpress K4 Series

Reviews:

Brands by name

Popular brands