5. Parameters
5-7
Figure 5.1 Parameter setting method
U(Monitor)-Parameter group
B(Basic)-Parameter group
F(Frequency)-Parameter group
S(System)-Parameter group
C(Control)-Parameter group
H(
I
/O)-Parameter group
P(Protection)-Parameter group
X 0-Subgroup
X 1-Subgroup
X n-Subgroup
X : U, B,, F, S, C, H, P
XY-01 Parameter
XY-02 Parameter
XY-n Parameter
Y : 0, 1, 2 ~ Value
Changing the Group
Changing the Subgroup
Changing the Parameter Number
xxx.x
(Parameter-Setting value)
*Change the number
using the up/down key
*Change the digit
using the shift key
Data Changing Mode
DATA
SET
5-8
MOSCON-E7 User’s Manual
5.1.2 Monitoring function setting
Letter or number in bold on display indicates that it is blinking. Only
the blinking letter or number can be changed. Next digit has to be
selected using the shift key ( ) to move to another group and
subgroup.
Figure 5.2 Selecting monitoring group (U)
When or is pressed from group U, next or previous subgroup
is displayed.
Since U has a monitoring function and the setting can not be altered,
can not be functioned to change the constant as in other groups.
DATA
SET
DATA
SET
SET
0.00 (U0.01)
U
0.01
U0.
01
U
0
.01
Power ON
DATA
SET
DATA
SET
