Samsung ME75C User Manual Download

Page: 219 / 257

219

Video

Image

•

3D video is not supported.

•

Content with a resolution larger than the resolution specified in the table
above is not supported.

•

Video content with a Bit rate or Frame rate larger than the rate specified in
the table above can cause choppy video during playback.

•

Video content will not play, or not play correctly, if there is an error in the
content or the container.

•

Some USB/digital camera devices may not be compatible with the player.

•

Supports up to H.264, Level 4.1

•

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.

•

For all Video codecs except MVC, VP8, VP6:

Below 1280 x 720: 60 frame max

Above 1280 x 720: 30 frame max

•

GMC 2 or higher is not supported.

•

Supports only BD MVC Spec.

•

Some codecs may not be supported in dual playback mode, where two video
files play simultaneously, and portrait playback mode.

•

Compatible image file format : Jpeg, bmp, png

•

Supported maximum resolution : 15,360 x 8,640

A higher resolution image may take longer to display on the screen.

Summary of Contents for ME75C


































































































































































































































































Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands

Samsung ME75C, User Manual

Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands