Samsung ME75C User Manual Download

Page: 10 / 257

Caution

Do not disconnect the power cord while the product is being used.

•

The product may become damaged by an electric shock.

Only use the power cord provided with your product by Samsung. Do not
use the power cord with other products.

•

A fire or electric shock may result.

Keep the power socket where the power cord is connected unobstructed.

•

The power cord must be disconnected to cut off power to the product
when an issue occurs.

•

Note that the product is not completely powered down by using only
the power button on the remote.

Hold the plug when disconnecting the power cord from the power socket.

•

An electric shock or fire may result.

Installation

Warning

DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.

•

A fire may result.

Have a technician install the wall-mount hanger.

•

Installation by an unqualified person can result in an injury.

•

Only use approved cabinets.

Do not install the product in poorly ventilated spaces such as a bookcase or
closet.

•

An increased internal temperature may cause a fire.

Install the product at least 10cm away from the wall to allow ventilation.

•

An increased internal temperature may cause a fire.

Keep the plastic packaging out of the reach of children.

•

Children may suffocate.

Summary of Contents for ME75C


































































































































































































































































Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands

Samsung ME75C, User Manual

Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands