Samsung ME75C User Manual Download

Page: 195 / 257

195

Network Schedule Multiframe

Playback restrictions

•

A maximum of two video files (

Videos

) can be played simultaneously.

•

In portrait playback mode, only one video file can be played at a time.

•

PIP

mode is enabled, more than one video (

Videos

) file cannot be played.

•

More than one

Flash

file cannot be played.

•

For

Office

files (PPT and Word files) and

PDF

files, only one file type is supported at a time.

•

LFD(.lfd) files are not supported.

Sound output restrictions

•

More than one sound output cannot be used.

•

Playback priority:

Flash

file > network BGM > local BGM > video file in the main frame selected by the user

―

Network BGM: Settings can be configured in step 1 when creating a server schedule.

―

Local BGM: BGM settings can be configured using the tools displayed after the

TOOLS

button is pressed during

MagicInfo Premium S

playback.

―

User-selected main frame: Main frame settings can be configured in step 2 when creating a server schedule.

Template files and LFD(.lfd) files

Restrictions

•

Playback using

Internal Auto Play

USB Device Auto Play

is only available.

•

Ensure a distributed folder (content / schedules) exists in

Internal Memory

USB

memory.

Summary of Contents for ME75C


































































































































































































































































Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands

Samsung ME75C, User Manual

Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands