Samsung ME75C User Manual Download

Page: 192 / 257

192

Video

Audio

Image

•

3D video is not supported.

•

Content with a resolution larger than the
resolution specified in the table above is not
supported.

•

Video content with a Bit rate or Frame rate larger
than the rate specified in the table above can
cause choppy video during playback.

•

Video content will not play, or not play correctly,
if there is an error in the content or the container.

•

Some USB/digital camera devices may not be
compatible with the player.

•

Supports up to H.264, Level 4.1

•

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and
AVCHD are not supported.

•

For all Video codecs except MVC, VP8, VP6:

Below 1280 x 720: 60 frame max

Above 1280 x 720: 30 frame max

•

GMC 2 or higher is not supported.

•

Supports only BD MVC Spec.

•

Some codecs may not be supported in dual
playback mode, where two video files play
simultaneously, and portrait playback mode.

•

Audio content with a Bit rate or Frame rate
larger than the rate specified in the table above
can cause choppy audio during playback.

•

Video content will not play, or not play
correctly, if there is an error in the content or
the container.

•

Some USB/digital camera devices may not be
compatible with the player.

•

Supports up to WMA 10 Pro 5.1 channel. WMA
lossless audio is not supported.

•

QCELP, AMR NB/WB are not supported.

•

Compatible image file format : Jpeg

•

Supported maximum resolution : 15,360 x 8,640

•

Supported image effects : 8 effects
(

Fade1

Fade2

Blind

Spiral

Checker

Linear

Stairs

Wipe

)

Summary of Contents for ME75C


































































































































































































































































Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands

Samsung ME75C, User Manual

Search results

Summary of Contents for ME75C

Reviews:

Related manuals for ME75C

Brands by name

Popular brands