Samsung LT-P468W, Owner'S Instructions Manual

Page: 30 / 126

Connecting a VCR
28
Viewing VCR Playback
Connection & Input Source Setup
Connecting a VCR
1
Connect the antenna cable to the ANTENNA IN
terminal on the back of the VCR.
• Connect either the indoor/outdoor antenna cable, the
CATV antenna cable or the Satellite antenna cable.
3
Connect the audio cable between the [Left
(white) -Audio- Right (red)] terminals on the side
or back of the TV and the [Audio (white/red)
Out] terminals on the VCR.
2
Connect the video cable between the [Video 1
In (yellow)] terminal on the back of the TV or the
[Video2 In (yellow)] terminal on the side of the
TV and the [Video Out (yellow)] terminal on the
back of the VCR.
4
Supply power to your TV and VCR after making
all the connections.
Turn your TV on, then press the [SOURCE] button
to select <AV1> or <AV2>.
• If <AV1> or <AV2> is unavailable, please check that the
video cable is connected correctly.
Turn on your VCR, then press the [PLAY] button.
1
2
OR
S-Video
Cable
VCR
Rear Panel of LCD TV
Video Cable
Audio Cable Coaxial Cable
œ
1
œ
3 2
√
Note
For a VCR with an S-VIDEO terminal, connect the S-
Video cable between the [S-Video In] on the TV and
the [S-Video Out] terminal on the VCR. For connection
of the audio cable please follow the instructions above.
Note
• If you have connected the TV and the VCR using an S-Video cable, press the
[SOURCE] button to select <S-Video1> or <S-Video2>.
• If you have connected the video cable to the [AV2] terminal, select <AV2>.
• Audio and video cables are sold separately.
AV1
1
SOURCE
BN68-00665D-01_22~51 9/1/04 2:34 AM Page 28