Alarm input
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Event setup
>.
3.
Select <
Alarm input
> from <
Event
action setup
>.
4.
Set whether or not to <
Enable
>.
5.
Specify an input device.
•
Type
- Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.
6.
Specify the <
Activation time
>.
•
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to <
Always
>, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[Clear (
)] : Reset all settings.
7.
Specify an operation that will perform if an alarm occurs.
•
FTP : Specify the use of FTP transfer in the alarm input setup.
•
E-mail : Specify the use of email transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
•
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
8.
When done, click [
Apply (
)
].
English
_103
●
SETUP SCREEN
Summary of Contents for iPolis SNB-7002
Page 1: ...NETWORK CAMERA User Manual SNB 7002 SND 7082 SND 7082F SNV 7082 ...
Page 20: ...overview 20_ overview UNLOCK UNLOCK b c Components ...
Page 129: ...PRODUCT OVERVIEW SNB 7002 Unit mm inch English _129 APPENDIX 150 5 5 93 72 0 2 83 60 0 2 36 ...
Page 130: ...appendix SND 7082 Unit mm inch 129 4 5 09 Ø133 5 24 Ø90 Ø100 4 3 95 125 110 130_ appendix ...
