•
Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
•
Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
•
Sharpness mode : Adjust the overall sharpness of the image.
If selecting <
On
>, you can adjust the sharpness of the image.
•
Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
•
Gamma : Adjust the contrast of the image.
•
Color level : Adjust the color level of the image.
•
Alarm in : Set the image to Color or B/W depending on the Open/Close state of
the alarm sensor.
If the Day & Night mode is set to Externel B/W, the alarm-in function of the event-alarm input page
will be disabled.
OSD Setup
1.
Select <
OSD
>.
2.
Select each item and set it properly.
•
Camera title : Specify whether or
not to display the camera title on the
screen.
You can enter up to 15 characters for the title.
•
Camera title position X, Y : Specify the coordinates where the camera title is
displayed on the screen.
Time OSD Setup
1.
Select <
Time OSD
>.
2.
Select each item and set it properly.
•
Time display : Specify the use of time
display on the screen.
•
Date format : Specify the date format
that will be displayed on the screen.
•
Time position display X, Y : Specify the position of time display on the screen.
•
Display weekday : Specify the use of date display date on the screen.
English
_87
●
SETUP SCREEN
Summary of Contents for iPolis SNB-7002
Page 1: ...NETWORK CAMERA User Manual SNB 7002 SND 7082 SND 7082F SNV 7082 ...
Page 20: ...overview 20_ overview UNLOCK UNLOCK b c Components ...
Page 129: ...PRODUCT OVERVIEW SNB 7002 Unit mm inch English _129 APPENDIX 150 5 5 93 72 0 2 83 60 0 2 36 ...
Page 130: ...appendix SND 7082 Unit mm inch 129 4 5 09 Ø133 5 24 Ø90 Ø100 4 3 95 125 110 130_ appendix ...
