QoS
You can specify the priority to secure a stable transfer rate for a specific IP.
1.
From the Setup menu, select the
<
Network (
)
> tab.
2.
Click <
QoS
>.
3.
Click the [
Add (
)
] button.
The IP list will be created.
4.
Enter an IP address to which you will
apply QoS.
M
The default prefix for IPv4 is 32;
For DSCP, the default is set to 63.
Only the IP addresses that are set to <
Use
> can be prioritized.
5.
Select an IP to delete from the list.
Click the [
Delete (
)
] button.
6.
When done, click [
Apply (
)
].
SNMP
With the SNMP protocols, the system or network admin can monitor the network devices
on a remote site, and configure the environment settings.
1.
From the Setup menu, select the
<
Network (
)
> tab.
2.
Click <
SNMP
>.
3.
Specify the <
SNMP
>.
•
Enable SNMP v1 : SNMP version 1
will be active.
•
Enable SNMP v2c : SNMP version 2
will be active.
- Read community : Provide the
name of the read community where you can access to the SNMP information.
The default name is <
public
>.
- Write community : Provide the name of the write community where you can
access to the SNMP information. The default name is <
write
>.
English
_99
●
SETUP SCREEN
Summary of Contents for iPolis SNB-7002
Page 1: ...NETWORK CAMERA User Manual SNB 7002 SND 7082 SND 7082F SNV 7082 ...
Page 20: ...overview 20_ overview UNLOCK UNLOCK b c Components ...
Page 129: ...PRODUCT OVERVIEW SNB 7002 Unit mm inch English _129 APPENDIX 150 5 5 93 72 0 2 83 60 0 2 36 ...
Page 130: ...appendix SND 7082 Unit mm inch 129 4 5 09 Ø133 5 24 Ø90 Ø100 4 3 95 125 110 130_ appendix ...
