Samsung iES4028F Management Manual Download Page 431

Page: 431 / 712

SNMP Commands

4-95

Command Usage

• Views are used in the

snmp-server group

command to restrict user access

to specified portions of the MIB tree.

• The predefined view “defaultview” includes access to the entire MIB tree.

Examples

This view includes MIB-2.

This view includes the MIB-2 interfaces table, ifDescr. The wild card is used to select
all the index values in this table.

This view includes the MIB-2 interfaces table, and the mask selects all index entries.

show snmp view

This command shows information on the SNMP views.

Command Mode

Privileged Exec

Example

Console(config)#snmp-server view mib-2 1.3.6.1.2.1 included
Console(config)#

Console(config)#snmp-server view ifEntry.2 1.3.6.1.2.1.2.2.1.*.2 included
Console(config)#

Console(config)#snmp-server view ifEntry.a 1.3.6.1.2.1.2.2.1.1.* included
Console(config)#

Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active

View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active

Console#

Table 4-25 show snmp view

- display description

Field

Description

View Name

Name of an SNMP view.

Subtree OID

A branch in the MIB tree.

View Type

Indicates if the view is included or excluded.

Storage Type

The storage type for this entry.

Row Status

The row status of this entry.

Summary of Contents for iES4028F









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iES4028F

Reviews:

Related manuals for iES4028F

Brands by name

Popular brands

Samsung iES4028F, Management Manual

Search results

Summary of Contents for iES4028F

Reviews:

Related manuals for iES4028F

Brands by name

Popular brands