Samsung iES4028F, Management Manual

Page: 369 / 712

System Management Commands
4-33
4
show memory
This command shows the location and size of free system memory.
Command Mode
Privileged Exec
Example
Frame Size Commands
This section describes commands used to configure the Ethernet frame size on the
switch.
jumbo frame
This command enables support for jumbo frames on the Gigabit Ethernet ports. Use
the
no form to disable it.
Syntax
[ no ] jumbo frame
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• This switch provides more efficient throughput for large sequential data
transfers by supporting jumbo frames up to 10 KB for the Gigabit Ethernet
ports. Compared to standard Ethernet frames that run only up to 1.5 KB, using
jumbo frames significantly reduces the per-packet overhead required to
process protocol encapsulation fields.
• To use jumbo frames, both the source and destination end nodes (such as a
computer or server) must support this feature. Also, when the connection is
operating at full duplex, all switches in the network between the two end nodes
must be able to accept the extended frame size. And for half-duplex
Console#show memory
FREE LIST:
Num Addr Size
--- ---------- ----------
1 0x7176640 1024
2 0x7176498 56
.
.
.
Table 4-10 Frame Size Commands
Command Function Mode Page
jumbo frame Enables support for jumbo frames GC 4-33