Samsung iES4028F Management Manual Download Page 109

Page: 109 / 712

Simple Network Management Protocol

3-53

linkDown

1.3.6.1.6.3.1.1.5.3

A linkDown trap signifies that the SNMP

entity, acting in an agent role, has

detected that the ifOperStatus object for

one of its communication links is about to

enter the down state from some other

state (but not from the notPresent state).

This other state is indicated by the

included value of ifOperStatus.

linkUp

1.3.6.1.6.3.1.1.5.4

A linkUp trap signifies that the SNMP

entity, acting in an agent role, has

detected that the ifOperStatus object for

one of its communication links left the

down state and transitioned into some

other state (but not into the notPresent

state). This other state is indicated by the

included value of ifOperStatus.

authenticationFailure

1.3.6.1.6.3.1.1.5.5

An authenticationFailure trap signifies

that the SNMPv2 entity, acting in an agent

role, has received a protocol message

that is not properly authenticated. While

all implementations of the SNMPv2 must

be capable of generating this trap, the

snmpEnableAuthenTraps object

indicates whether this trap will be

generated.

RMON Events (V2)

risingAlarm

1.3.6.1.2.1.16.0.1

The SNMP trap that is generated when

an alarm entry crosses its rising threshold

and generates an event that is configured

for sending SNMP traps.

fallingAlarm

1.3.6.1.2.1.16.0.2

The SNMP trap that is generated when

an alarm entry crosses its falling

threshold and generates an event that is

configured for sending SNMP traps.

Private Traps

†

swPowerStatus

ChangeTrap

1.3.6.1.4.1.236.4.1.12.1.103.2.1.0.1

This trap is sent when the power state

changes.

swIpFilterRejectTrap

1.3.6.1.4.1.236.4.1.12.1.103.2.1.0.40

This trap is sent when an incorrect IP

address is rejected by the IP Filter.

pethPsePortOnOff

Notification

1.3.6.1.4.1.236.4.1.12.1.103.173.2.1.0.43 This notification indicates if a PSE (Power

Sourcing Equipment) Port is delivering

power to the PD (Powered Device). This

notification is sent on every status change

except in search mode.

pethPsePortPower

MaintenanceStatus

Notification

1.3.6.1.4.1.236.4.1.12.1.103.173.2.1.0.44 This notification indicates a Port Change

Status and is sent on every status

change.

Table 3-5 Supported Notification Messages

(Continued)

Object Label

Object ID

Description

Summary of Contents for iES4028F









































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for iES4028F

Reviews:

Related manuals for iES4028F

Brands by name

Popular brands

Samsung iES4028F, Management Manual

Search results

Summary of Contents for iES4028F

Reviews:

Related manuals for iES4028F

Brands by name

Popular brands