manualshive.com logo in svg

Samsung iES4028F, Management Manual

The Samsung iES4028F is a high-performance network switch designed for efficient data management. With this device, users can easily handle their network infrastructure and streamline their operations. Discover its full potential by downloading the free management manual from our website, ensuring you make the most out of this powerful product.

Share
Download
background image

Command Line Interface

4-220

4

Example

The following example configures the switch to mirror received packets from port 6 
to 11:

show port monitor

This command displays mirror information.

Syntax 

show port monitor

 [

interface

]

interface

 - 

ethernet

 

unit

/

port

 (source port) 

•

unit

 - Stack unit. (Range: 1) 

•

port

 - Port number. 

(Range: 1-28 on iES4028F/iES4028FP, 1-24 on iES4024GP)

Default Setting 

Shows all sessions.

Command Mode 

Privileged Exec

Command Usage 

This command displays the currently configured source port, destination port, 
and mirror mode (i.e., RX, TX, RX/TX).

Example 

The following shows mirroring configured from port 6 to port 11:

Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6 rx
Console(config-if)#

Console(config)#interface ethernet 1/11
Console(config-if)#port monitor ethernet 1/6 rx
Console(config-if)#end
Console#show port monitor
Port Mirroring
-------------------------------------
 Destination port(listen port):Eth1/11
 Source port(monitored port)  :Eth1/6
 Mode                         :RX
Console#

Summary of Contents for iES4028F









































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for iES4028F

Wave wifi EC Series Quick Start Manual preview
EC Series
Brand: Wave wifi Pages: 2
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
H3C NSQ1GT48EA0 Manual preview
NSQ1GT48EA0
Brand: H3C Pages: 3
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Brand: Korenix Pages: 16
Sans Digital ELITENAS EN104L+(B) Quick Installation Manual preview
ELITENAS EN104L+(B)
Brand: Sans Digital Pages: 9
Compro Technology RS-2104 Quick Installation Manual preview
RS-2104
Brand: Compro Technology Pages: 2
Korenix JetNet 3705 User Manual preview
JetNet 3705
Brand: Korenix Pages: 25
FOR-A MFR-1616 Quick Start Manual preview
MFR-1616
Brand: FOR-A Pages: 2
Tripp Lite N201-003-WH Specifications preview
N201-003-WH
Brand: Tripp Lite Pages: 2
OneAccess One80XM Installation Manual preview
One80XM
Brand: OneAccess Pages: 47
PairGain T1L2PY0AA Manual preview
T1L2PY0AA
Brand: PairGain Pages: 80
SmartBridges airPoint Nexus sB3210 User Manual preview
airPoint Nexus sB3210
Brand: SmartBridges Pages: 55
Teldat H2 RAIL Installation Manual preview
H2 RAIL
Brand: Teldat Pages: 47
Tektronix 7B87 Instruction Manual preview
7B87
Brand: Tektronix Pages: 143
Linksys EFG20 User Manual preview
EFG20
Brand: Linksys Pages: 37
Gigamon GigaVUE H Series Hardware Installation Manual preview
GigaVUE H Series
Brand: Gigamon Pages: 55
NetApp StorageGRID Webscale SG5700 Series Install preview
StorageGRID Webscale SG5700 Series
Brand: NetApp Pages: 15
Vivotek PZ7111 Quick Installation Manual preview
PZ7111
Brand: Vivotek Pages: 12

Brands by name

Popular brands

Load more brands