Getting Started 11
Warning!
While the device is charging, if the touch screen
does not function due to an unstable power supply,
unplug the USB power adapter from the power outlet
or unplug the USB cable from the device.
3.
When charging is finished, remove the flat end from
the Charger/Accessory Interface connector on the
device.
Note:
Failure to unplug the wall charger before you remove the
battery, can cause damage to the device.
Turning Your Device On and Off
Turning Your Device On
Press and hold the
Power/Lock
Key
.
For more information, refer to
“Unlocking the Device”
on page 15.
Note:
Your device’s internal antenna is located along the top
back of the device. Do not block the antenna; doing so
may affect signal quality and may cause the device to
operate at a higher power level than is necessary.
Charger/Accessory Port
Correct
Incorrect