10
1.
With the battery installed, remove the plastic cover of
the Power/Accessory Interface connector on the upper
right side of phone.
2.
Plug the data cable into the base piece provided and
into the Power/Accessory Interface connector on your
phone.
3.
Plug the base piece into a standard AC wall outlet.
4.
When the battery is fully charged, the phone displays a
message telling you the battery is full. Remove the
connector from the phone.
Note:
Failure to unplug the wall charger before you remove the
battery, can cause damage to the phone.
Warning!
If your device has a touch screen display, please
note that a touch-screen responds best to a light
touch from the pad of your finger or a non-metallic
stylus. Using excessive force or a metallic object
when pressing on the touch screen may damage the
tempered glass surface and void the warranty.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, the battery icon (
) blinks and the device sounds
a warning tone at regular intervals. In this condition, your
phone conserves its remaining battery power by reducing the
backlight’s brightness and entering a dimming mode. For a
quick check of your battery level, glance at the battery
charge indicator located in the upper-right corner of your
device’s display. Five bars (
) indicate a full charge.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
To turn the phone on:
Press and hold
until the phone switches on.
The phone launches the activation splash screen and
searches for the network. Once the network has been
found, you can make or receive calls.
To turn the phone off:
Press and hold
until the phone switches off.
