Samsung ER-GX20ZBBA User Manual Download Page 124

Page: 124 / 163

123

Software Notes

■

Samsung Master : This is the all-in-one multi media software solution

You can download, view, edit and save your digital images with this
software.
You can also edit and save the still images.
This software is only compatible with Windows.

■

Using Samsung RAW Converter 2.0, you can convert a RAW (*.dng)

le into a JPEG or TIFF

le format.

●

You should allow 5~10 seconds for running the automatic setup program

according to the capability of your computer. If the frame is not shown, run

the [

Windows Explorer

] and select [setup.exe] in the CD-ROM Drive root

directory.

●

PDF documents of the user manual are included in the Software CD-ROM

supplied with this camera. Search the PDF

les with Windows explorer.

Before opening the PDF

les, you must install the Adobe Reader included

in the Software CD-ROM.

●

To install the Adobe Reader 6.0.1, the Internet Explorer 5.01 must be

installed. To upgrade the Internet Explorer, visit www.microsoft.com.

Summary of Contents for ER-GX20ZBBA




































































































































































Search results

Summary of Contents for ER-GX20ZBBA

Reviews:

Related manuals for ER-GX20ZBBA

Brands by name

Popular brands

Samsung ER-GX20ZBBA, User Manual

Search results

Summary of Contents for ER-GX20ZBBA

Reviews:

Related manuals for ER-GX20ZBBA

Brands by name

Popular brands