ENG-
21
C
O N N E C T I O N S
Y
ou must have the anttenna
connected to set the Auto Clock
Connecting a Power Cord &
Auto Setup
1
Y
our DVD-VCR's power cord should be plugged
into a standard 120V/60Hz wall outlet. Avoid
pressing any buttons on the remote control or on
the unit during Auto Setup. While your DVD-VCR
is running Auto Setup, “Auto” will blink. When
Auto Setup is complete, the current time will be
displayed on the front panel. If Auto Setup fails to
locate a channel to set the clock, you should set
the clock manually. (See page 24 to 25.)
2
T
urn on the power by pressing the
POWER
button on the remote control or on the front panel.
3
T
urn on your TV by pressing the
POWER
button
on the TV remote control.
▼
Y
ou must have the anttenna connected to set
the Auto Clock. (See pages 13~14).
00593B V5500/XAC_Eng1 02/11/05 09:01 Page 21