ENG-16
C
O N N E C T I O N S
Connection to a TV (S-V
ideo)
-
Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and
color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio output.)
1
Using an S-V
ideo cable (not included), connect
the
S-VIDEO OUT
terminal on the rear of the
DVD-VCR to the
S-VIDEO IN
terminal of your
TV.
2
Using the audio cables, connect the
AUDIO (red
and white) OUT
terminals on the rear of the
DVD-VCR to the
AUDIO (red and white) IN
terminals of your
TV.
Turn on the DVD-VCR and TV.
3
W
ith the unit in stop mode, set the Alt video
output to
S-V
ideo
in the Display Setup menu (see
pages 59~60) or press the
PROGRESSIVE
button on the remote control until S-V
ideo is
output.
Notes
-
If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
White
Audio Cable
S-Video Cable
(not included)
Red
Red
White
4
Press the input selector on your
TV remote
control until the S-Video signal from the DVD-
VCR appears on your TV screen.
00593B V5500/XAC_Eng1 02/11/05 09:01 Page 16
