15
14
English
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)
1
If using an optical cable (not included), connect the
DIGI-
TAL AUDIO OUT (OPTICAL)
terminal on the rear of the
DVD player to the
DIGITAL AUDIO IN (OPTICAL)
terminal
of the Amplifier.
If using a coaxial cable (not included), connect the
DIGI-
TAL AUDIO OUT (COAXIAL)
terminal on the rear of the
DVD player to the
DIGITAL AUDIO IN (COAXIAL)
termi-
nal of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO
,
S-
VIDEO
or
COMPONENT OUT
terminals on the rear of the
DVD player to the
VIDEO
,
S-VIDEO
or
COMPONENT IN
terminal of TV.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
external input
in order to hear sound from the DVD player.
Note
- When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in
Audio Setup menu. If it is set to Off, sound doesn't come out or there will be a big noise.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26 to 27)
- The position of terminals can vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
- Please remove the dust cover before using the optical cable (not included) and put the cover on the cable
again when it's not used.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 26 to 27)
- The position of terminals may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Connection to a 5.1CH Analog Amplifier
1
If using audio cables for 5.1 CH Analog Amplifier (not
included) connect the
5.1CH ANALOG AUDIO OUT
termi-
nals on the rear of the DVD player to the
5.1CH ANALOG
AUDIO IN
terminals of the 5.1CH Analog Amplifier.
2
Using the video signal cable(s), connect the
VIDEO, S-
VIDEO
or
COMPONENT
terminals on the rear of the DVD
player to the
VIDEO
,
S-VIDEO
or
COMPONENT
terminals
of your TV as described on pages 9 to 12.
3
Turn on the DVD player, TV, and Amplifier.
4
Press the input select button of the Amplifier to select
exter-
nal input
in order to hear sound from the DVD player.
WHITE
BLACK
GREEN
WHITE
BLACK
GREEN
5.1ch Analog
Amplifier
DVD-P360H_XTL 01 2/22/06 8:47 AM Page 14