Samsung DM32D-S User Manual Download Page 144

Page: 144 / 194

Power Control

MENU

→

System

→

Power Control

→

ENTER

Power Control

Auto Power On

PC Module Power

Max. Power Saving

Standby Control

Power Button

Network Standby

Off

Auto

Power On Only

Off

The displayed image may differ depending on the model.

Auto Power On

This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.

•

Off

PC Module Power

The PC module can be turned on/off separately from the LFD.

Synced Power-On

To turn on the PC module without turning on the LFD, select

Off

•

Off

Synced Power-Off

To turn off the LFD without turning off the PC module, select

Off

•

Off

Max. Power Saving

Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.

•

Off

―

Available only

DVI

HDMI

DisplayPort

mode.

Summary of Contents for DM32D-S



































































































































































































Search results

Summary of Contents for DM32D-S

Reviews:

Related manuals for DM32D-S

Brands by name

Popular brands

Samsung DM32D-S, User Manual

Search results

Summary of Contents for DM32D-S

Reviews:

Related manuals for DM32D-S

Brands by name

Popular brands