Samsung DM32D-S User Manual Download Page 118

Page: 118 / 194

Channel

Configure the

Channel

settings for the product.

Available in

mode only.

Auto Program

MENU

→

Channel

→

Auto Program

→

ENTER

Channel

Auto Program

Antenna

Channel List

Edit Channel

Edit Favorites

Audio Options

Program Rating Lock

Air

The displayed image may differ depending on the model.

Available in

mode only.

This feature automatically searches and saves all received channels.

•

Auto Program

takes about 6–7 minutes.

Go to the

Auto Program

menu.

Press the

Start

button.

Select a broadcast signal to search.

Press the

button to start

Auto Program

When channel configuration is complete, select

Close

Cancelling Auto Program

Press the

Stop

button.

Stop Auto Program?

message appears.

Press the

Yes

button.

Summary of Contents for DM32D-S



































































































































































































Search results

Summary of Contents for DM32D-S

Reviews:

Related manuals for DM32D-S

Brands by name

Popular brands

Samsung DM32D-S, User Manual

Search results

Summary of Contents for DM32D-S

Reviews:

Related manuals for DM32D-S

Brands by name

Popular brands