Samsung DCS-VIP User Manual Download

Page: 78 / 216

DCS-VIP User Guide

Chapter 7 System Management

This chapter explains how to manage the DCS-VIP through the web browser.

To manage the DCS-VIP system, click the SYSTEM MANAGEMENT menu on the

DCS-VIP web management screen. The following Advance menu screen will appear.

PASSWORD

User name and password for web management screen connection for the DCS-VIP

system are ‘guest’ and ‘samsung’, respectively. On the PASSWORD screen, you

can change the default password.

To change the password, set up the following parameters and click the Set button.

Old password : Enter the old password.

New password : Enter the new password.

Confirm New Password : For confirmation, re-enter the new password.

MIB SAVE/RESTORE

On the MIB SAVE/RESTORE screen, you can save the system configuration

informations(MIB) changed in flash memory.

Operation to Perform : Default is ‘Save Configuration’. Each option function can

be summarized as follows.

Save Configuration : You can save the system configuration

informations(MIB) changed in the flash memory.

Restore Configuration : You can restore the system configuration

informations(MIB) from the flash memory.

No Restore : You do not restore the system configuration informations(MIB).

SOFTWARE DOWNLOAD

On the Software Download screen, you can download the system software for each

module.

File Name : Click the dropdown button to select the software to download.

IP Address : Enter the TFTP server’s IP address where the software to download

is saved.

Summary of Contents for DCS-VIP

























































































































































































































Search results

Summary of Contents for DCS-VIP

Reviews:

Related manuals for DCS-VIP

Brands by name

Popular brands

Samsung DCS-VIP, User Manual

Search results

Summary of Contents for DCS-VIP

Reviews:

Related manuals for DCS-VIP

Brands by name

Popular brands