DCS-VIP User Guide
142
external call forwarding.
34. FIRST DIGIT TIME (1-255 SEC)
:
This timer controls how long the
system will wait for dialing to begin before dropping the dial tone and returning the
user to error tone.
35. HOK FLASH MAX TM (20-2500 MSEC)
:
This timer monitors the duration of
a hookswitch flash to ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (LONGEST DURATION).
36. HOK FLASH MIN TM (20-2500 MSEC)
:
This timer monitors the duration of
a hookswitch flash to ensure that the flash is valid and not a line noise or an
accidental hookswitch bounce (SHORTEST DURATION).
37. HOOK OFF TIME (100-2500 MSEC)
:
This timer controls the time before
dial tone is sent to a single line station.
38. HOOK ON TIME (20-2500 MSEC) :
This timer sets the minimum amount of
time that the system will recognize as an SLT hang up.
39. INQUIRY RELEASE (1-255 SEC) :
This timer monitors the duration of the
interaction of the soft key to determine when to return the LCD back to normal
status. This timer affects only display phones.
40. INTER DIGIT TIME (1-255 SEC)
:
The timer controls the grace
period between dialing valid digits before dropping the call and returning the user
back to error tone.
41. ISDN INT DGT TM (1-15 SEC) :
This timer controls the grace period
between dialing valid digits and the end of the dialing string on an ISDN call.
42. KMMC LOCK OUT TM (10-255 SEC)
:
This timer controls the grace
period between programming actions while in a programming session. The timer
automatically returns the system to secure programming status.
43. LCR ADVANCE TIME (1-255 SEC)
:
This timer controls the duration of
time before selecting the next allowable route when a station is allowed to route
advance.
44. LCR INTER DIGIT (1-255 SEC) :
This timer controls the grace period
between dialing valid digits before dropping the call and returning the user to error
tone.
45. MCL DELAY TIME (1-8 SEC) : Controls the time when the system should start
transmitting Authorisation code after sending MCL Access code.
46. MS LED ON TIME (0-10 SEC)
:
This timer controls the duration a Manual
Signalling key will remain on after use.
47. OFF HOK RING INT (1-255 SEC)
:
This timer controls the duration of
time between ring bursts to a user who has a camped-on call.
48. OFF HOOK SELECT (1-255 SEC) :
This timer controls the grace period before
placing a internal/external call as programmed in MMCs 306 and 307.
49. OHVA ANSWER TIME (1-255 SEC)
:
This timer controls the time
duration of an OHVA call before automatic rejection.
50. PAGE TIME OUT (1-255 SEC)
:
This timer controls the duration of a page
announcement.
51. PAGE TONE TIME (100-2500 MSEC)
:
This timer controls the duration of
tone burst heard over the page prior to the page announcement.
52. PARK RECALL TIME (0-255 SEC)
:
This timer controls the duration of
time a call is parked before recalling to the call park originator.
53. PC-MMC LOCK TIME (1-60 MIN) :
This timer monitors the PCMMC activity,
drops the link if no action is created by PCMMC and returns the system to secure
program status.
55. POWER DOWN TIME (100-2500 MSEC)
: T
his timer monitors the power to
the ROM pack to begin shutdown status.
60. RECALL DISCONNECT (1-255 MIN)
:
This is the time an attendant recall
will ring before being disconnected.
61. RECALL WAIT TIME (0-255 SEC)
:
This is the time any recall (hold or
transfer) continues to recall at your station before it recalls to the operator.
64. SYS HOLD RECALL (0-255 SEC) : This timer determines the time calls can be
left on hold before recalling back to the holding station. This is a system-wide
timer. Setting timer to 000 means no recalling will take place.
65. TRANSFER RECALL (0-255 SEC) :
This timer determines the time that
