DCS-VIP User Guide
72
220-300.
!
Sub Protocol Type : Select the sub protocol associated with the primary protocol
(UDP, TCP, SPX etc.). If ‘*’ is entered for this parameter, the
basic
value will be
used. The value range is 1~255.
!
Action Policy : Set up how you will apply filter rules defined in each parameter of
the Filter Rules screen.
−
ALLOW : This allows receiving/transmitting of packets conforming to filter
rules defined in each parameter.
−
DENY : This denies receiving/transmitting of packets conforming to filter
rules defined in each parameter.
−
DISABLE : This does not apply filter rules defined in each parameter of the
Filter Rules screen, but saves them for later use.
−
INVALID : This neither applies nor saves filter rules defined in each
parameter of the Filter Rules screen.
After finishing setting up all the parameters above, click on the SET button. If you
want to apply filter rules to other protocols, click on the NEXT button to set up the
parameter values. Then, click on the SET button.
Rule Map
On the Rule Map screen, you can apply several rules defined in the Filter Rule menu
by selecting them.
!
Protocol Type : Select the protocol type set in ‘protocol type’ item of Access List
Setup menu.
!
Filtering Rule Numbers : Enter the number of the filter rule you want to apply.
The value for this parameter is the ‘Rule Number’ value set in the Filter Rule menu.
When entering individual filter rule numbers, use ‘,’ to separate them
(e.g. 1,2,4
)
and when entering a range of filter rule numbers , use ‘-‘ (e.g. 1-4). You can define
up to 100 filter rules. Enter ‘0’ if no filter rule is applied.
!
Rule Map Status : To apply the Rule Map defined on this screen, select ‘Current’,
otherwise select ‘Invalid’.
After finishing setting up all the parameters above, click on the SET button. If you
want to apply the Rule Map to other protocols, click on the NEXT button to set up
the parameter values. Then, click on the SET button.
