DCS-VIP User Guide
47
BRI S/T
BRI S/T
BRI S/T
BRI S/T
On the BRI S/T screen, you can select whether to use each BRI port as trunk port
or S0 port.
Select whether to use trunk port or S0 port by clicking the Mode dropdown button
for each BRI port. Then, click the Set button.
After change the BRI S/T mode, you should initialize the BRI channel. For more
information about this, refer to BRI RESTART (below).
BRI RESTART
BRI RESTART
BRI RESTART
BRI RESTART
On the BRI RESTART screen, you can initialize the BRI channel when you change
the BRI S/T mode.
If you want to initialize the BRI channel, you can select the BRI Restart parameter
to mark V, and then click the Set button.
