Samsung CLP CLP-550 Setup Manual Download Page 222

Page: 222 / 289

SING

OUR

RINTER

INUX

Installing the Printer Driver

System Requirements

Supported OS

• Redhat 6.2/7.0/7.1 and above

• Linux Mandrake 7.1/8.0 and above

• SuSE 6.4/7.0/7.1 and above

• Debian 2.2 and above

• Caldera OpenLinux 2.3/2.4 and above

• Turbo Linux 6.0 and above

• Slackware 7.0/7.1 and above

Recommended Requirements

• Pentium IV 1 GHz or higher

• RAM 256 MB or higher

• HDD 1 GB or higher

Softwares

• Glibc 2.1 or higher

• GTK+ 1.2 or higher

• GhostScript

Installing the Printer Driver

Make sure that you connect the printer to your computer.
Turn both the computer and the printer on.

When the Administrator Login window appears, type in
“

root

” in the Login field and enter the system password.

OTE

: You must log in as a super user (root) to install the printer

software. If you are not the super user, ask your system
administrator.

Summary of Contents for CLP CLP-550


































































































































































































































































































Search results

Summary of Contents for CLP CLP-550

Reviews:

Related manuals for CLP CLP-550

Brands by name

Popular brands

Samsung CLP CLP-550, Setup Manual

Search results

Summary of Contents for CLP CLP-550

Reviews:

Related manuals for CLP CLP-550

Brands by name

Popular brands