Samsung CLP CLP-550 Setup Manual Download

Page: 199 / 289

OLVING

ROBLEMS

Common Macintosh Problems

Problems in the Chooser

Printing Errors

Problem

Possible Cause and Solution

The printer driver icon
does not appear in
Chooser.

Software is not installed correctly.
• The LaserWriter driver should be present as part of the

Macintosh OS. Make sure that the LaserWriter driver is in the

Extensions

folder within the

Systems

folder. If not, install

the LaserWriter driver component from the Macintosh OS CD.

• Make sure that you are using a high-quality cable.
• Make sure that the printer is on the correct network. Select

Network

AppleTalk Control Panel

from

Control

Panels

in the

Apple

menu and then choose the correct

network.

The printer name does
not appear in the

Select a PostScript
Printer

box in the

Chooser.

• Make sure that the cables are connected correctly and the

printer is turned on.

• Check if “Ready” appears on the display of the control panel. If

not, press the

On Line/Continue

button to switch your printer

to on-line.

• Make sure that the correct printer driver has been selected in

Chooser.

• If the printer resides on a network with multiple zones, make

sure that the correct zone is selected in the AppleTalk Zones
box in Chooser.

• Make sure that AppleTalk is on; the button next to

Active

selected in Chooser. You may need to restart the computer to
activate the change.

Problem

Possible Cause and Solution

You cannot use the
computer while the
printer is printing.

Background Printing has not been selected.
• For LaserWriter 8.3, turn

Background Printing

on in the

Chooser. Status messages will now be redirected to the Print
Monitor allowing you to continue working while the computer
is processing data to be sent to the printer.

• For LaserWriter 8.4 or higher, turn

Background Printing

at the Print window.

Summary of Contents for CLP CLP-550


































































































































































































































































































Search results

Summary of Contents for CLP CLP-550

Reviews:

Related manuals for CLP CLP-550

Brands by name

Popular brands

Samsung CLP CLP-550, Setup Manual

Search results

Summary of Contents for CLP CLP-550

Reviews:

Related manuals for CLP CLP-550

Brands by name

Popular brands