Starting to Cool
C
You must select the COOL mode if you wish to adjust the:
◆
Cooling temperature
◆
Fan speed when cooling
1
Press MODE under the remote control flap one or more times until the
COOL indicator is displayed.
2
Select the temperature by pressing the TEMP.SET
▲
or
▼
buttons one
or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
3
Select the fan speed by pressing the FAN SPEED button one or more
times until the required setting is displayed:
Low
Medium
High
Natural
Auto
4
Control the air flow direction when necessary.
Refer to page 16.
5
Each time you change the temperature by one degree,
the indoor unit beeps.
The air conditioner will only start cooling if the room temperature
is higher than the selected temperature.
The fan will, however, operate. During cooling, the operating
light is green.
NOTE
Each time you change the fan setting, the indoor unit beeps.
NOTE
NATURAL
AUTO
The air conditioner is fitted with a protection feature which
prevents the unit from being damaged when it is started
immediately after being:
◆
Switched on
◆
Stopped
After a rest period of three minutes, it will start up normally.
IMPORTANT
E-
12
If necessary, press the ON/OFF( ) button.
Result:
◆
The OPER. light on the indoor unit switches on.
◆
The operation mode previously set is displayed.
◆
The indoor unit beeps twice.
◆
The air conditioner starts up in the current mode.
Summary of Contents for APH-2807ERX
Page 23: ...ENGLISH MEMO E 23...
