Samsung APH-2807ERX, Owner'S Instructions Manual

Page: 14 / 24

Removing Excess Humidity
C
If the atmosphere in your room is very humid or damp, you can remove
excess humidity without lowering the room temperature excessively.
1
Press MODE under the remote control flap one or more times until the
DRY indicator is displayed. 2
Select the temperature by pressing the TEMP.SET
▲
or
▼
buttons
one or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
3
The air conditioner is fitted with a protection feature which
prevents the unit from being damaged when it is started
immediately after being:
◆
Switched on
◆
Stopped
After a rest period of three minutes, it will start up normally.
IMPORTANT
Each time you change the temperature by one degree,
the indoor unit beeps.
NOTE
When the unit is in the dry operation mode, the air flow quantity
is automatically set. Therefore, it is not necessary to select
the air flow quantity separately.
NOTE
E-
14
If necessary, press the ON/OFF( ) button.
Result:
◆
The OPER. light on the indoor unit switches on.
◆
The operation mode previously set is displayed.
◆
The indoor unit beeps twice.
◆
The air conditioner starts up in the current mode.