You can turn the air conditioner on or off automatically.
Example: You wish to start cooling your room before you
return from work; you decide to:
◆
Set the air conditioner going at 5:30 p.m.
◆
Switch it off at 11:30 p.m.
Check that the current time is correct before setting
the timer; if not, refer to page 8.
Press the ON/OFF( ) button.
You cannot make any reservation in the “off” state.
1
Press MODE under the remote control flap one or more times until
the COOL indicator is displayed.
2
Press the TIMER ON button.
Result:
◆
The TIMER indicator is displayed.
◆
The ON indicator flashes.
◆
The preset time is displayed.
3
When you are satisfied with the start time, press SET-TIMER.
Result:
◆
The indoor unit beeps.
◆
The TIMER light switches on.
◆
The unit is switched off and will start up automatically
when the start time is reached.
5
Press the TIME
▲
or
▼
buttons to set the “on time”(“off time”).
Result:
AM or PM are displayed to indicate whether the setting
corresponds to a time before or after midday.
4
Press the TIMER OFF button.
6
Indicate the time at which you wish to stop the air conditioner;
to do so, follow steps 4 above.
7
When you are satisfied with the stop time, press SET-TIMER to transmit
the settings to the indoor unit.
Result:
The indoor unit beeps.
8
You can hold the button down to scroll rapidly through the figures.
NOTE
You can set:
◆
The start time only
◆
The stop time only
◆
Both the start and stop times
◆
Refer to page 19 for detailed information about the method
of cancelling the timer.
The timer function allows reserved operation using only
the remote control.
NOTE
IMPORTANT
ENGLISH
Setting the Timer
E-
17
Summary of Contents for APH-2807ERX
Page 23: ...ENGLISH MEMO E 23...
