Samsung AC444FBRDEH, Installation Manual

Page: 18 / 23

AA
18
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Set the installation option according to the installation condition of an air conditioner.
- The default setting of an indoor unit installation option is “02000-100000-200000-300000”.
- Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there is
more than one indoor unit.
- No need to assign SEG3, 6, 9, 10, 11, 16, 21, 22, 23, 24 which are non applicable. Even though those segments are set,
they will be ignored.
- If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
4. Set the indoor unit option by wireless remote controller.
Setting an indoor unit installation option (suitable for the condition of each installation location)
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option
4&( 4&( 4&( 4&( 4&( 4&(
&YQMBOBUJPO 1"(& .0%&
3&4&37&%
6TFPGFYUFSOBM
temperature sensor
6TFPGDFOUSBM
control
3&4&37&%
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details
0 2
0 Disuse 0 Disuse
1
6TF
1
6TF
Option 4&( 4&( 4&( 4&( 4&( 4&(
&YQMBOBUJPO 1"(&
3&4&37&% 3&4&37&% 3&4&37&% 3&4&37&%
.BTUFS4MBWF
Indication
and
Details
Indication Details Indication Details
1
0 slave
1 master
Option 4&( 4&( 4&( 4&( 4&( 4&(
&YQMBOBUJPO 1"(&
6TFPGFYUFSOBM
control
Setting the output
of external control
3&4&37&%
#V[[FSDPOUSPM
3&4&37&%
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details
2
0 Disuse 0
Thermo
on
0 6TFPGCV[[FS
1
0/0''
Control
1
Operation
on
1
/POVTF
PGCV[[FS
2
OFF
Control
Setting an indoor unit address and installation option