Samsung AC444FBRDEH, Installation Manual

Page: 12 / 23

12
AA
Connecting the connection cord
t "MXBZTSFNFNCFSUPDPOOFDUUIFSFGSJHFSBOUQJQFTCFGPSFQFSGPSNJOHUIFFMFDUSJDDPOOFDUJPOT
8IFOEJTDPOOFDUJOHUIFTZTUFNBMXBZTEJTDPOOFDUUIFFMFDUSJDDBCMFTCFGPSFEJTDPOOFDUJOHUIFSFGSJHFSBOUQJQFT
t "MXBZTSFNFNCFSUPDPOOFDUUIFBJSDPOEJUJPOFSUPUIFHSPVOEJOHTZTUFNCFGPSFQFSGPSNJOH
the electric connections.
The indoor unit is powered by the outdoor unit by means of a H07 RN-F connection cable (or a more power model),
with insulation in synthetic rubber and jacket in polychloroprene(neoprene), in accordance with the requirements of standard EN 60335-2-40.
1. Remove the screw on the electrical component box and remove the cover plate.
2. Route the connection cord through the side of the indoor unit and connect the cable to terminals; refer to the figure below.
3. Route the other end of the cable to the outdoor unit through the ceiling & the hole on the wall.
4. Reassemble the electrical component box cover, carefully tightening the screw.
Indoor Power supply
Communication Cable
Power Supply
.BY.JO 7
Indoor Power cable
7_)[
±10% 0.75~1.5mm²,3wires 0.75~1.5mm²,2wires
Ê 'PSDPOOFDUJPODBCMFVTFUIFHSBEF)3/'PS)3/'NBUFSJBMT
Ê 4DSFXTPOUFSNJOBMCMPDLNVTUOPUCFVOTDSFXFEXJUIUIFUPSRVFMFTTUIBOLHGtDN
Ê 4JODFJUIBTUIFFYUFSOBMQPXFSTVQQMZSFGFSUPUIFPVUEPPSVOJUJOTUBMMBUJPONBOVBMGPS."*/108&3
Wiring diagram
1 phase
Between Indoor and Outdoor Connection cable Specifications(Common in use)
Terminal Block SPEC (Indoor)
8IFOJOTUBMMJOHUIFJOEPPSVOJUJOBDPNQVUFSSPPNVTFUIF
EPVCMFTIJFMEFE 5BQFBMVNJOVNQPMZFTUFSCSBJEDPQQFS
DBCMFPG'30))3UZQF
"$108&3.4$3&8
11 13
$0..6/*$"5*0/.4$3&8
7.5
13.8
18
5JHIUFOJOH5PSRVF LHGtDN
.
8.0~10.0
. 12.0~15.0
In case of extending the electric wire, please
DO NOT use a round-shaped pressing socket.
- Incomplete wire connections can cause
electric shock or a fire.
WARNING
, .
& . , &
& &
& &
& &
Outdoor unit
If using a multi system, refer to the manual supplied with the outdoor unit.
&BSUI
terminal
Indoor unit