10
AA
8BMM
Indoor unit
Drain hose
5IFESBJOIPTFNVTU/05
slant upwards.
5IFFOEPGUIFESBJOIPTFNVTU/05
be placed under water.
The drain hose must not
be bent.
Keep a clearance of at least
5cm between the end of the
drain hose and the ground.
5cm
less
Do not place the end of the
drain hose in a hollow.
Ditch
Installing and connecting the drain hose of the indoor unit
8IFOJOTUBMMJOHUIFESBJOIPTFGPSUIFJOEPPSVOJUDIFDLJGDPOEFOTBUJPOESBJOJOHJTBEFRVBUF
8IFOQBTTJOHUIFESBJOIPTFUISPVHIUIFNNIPMFESJMMFEJOUIFXBMMDIFDLUIFGPMMPXJOHT
t *GZPVEPOPUVTFUIFPUIFSESBJOIPTFIPMFCMPDLJUXJUIBSVCCFSTUPQQFS
t .BLFTVSFUIFJOTUBMMFEEJSFDUJPOPGUIFESBJOIPTFJTDPSSFDU
Inadequate installation may cause condensate water leakage.
t *GUIFESBJOIPTFJTSPVUFEJOTJEFUIFSPPNJOTVMBUFUIFIPTFTPUIBUESJQQJOHDPOEFOTBUJPOEPFTOPUEBNBHFUIF
GVSOJUVSFPSøPPST
t %0/058"--615)&%3"*/)04&$0//&$5*0/
Drain hose connection must be easy accessible and serviceable.
1. If necessary, connect the 2-meter extension drain hose to the drain hose.
2. If you use the extension drain hose, insulate the inside of the extension drain hose with a shield.
3. Fit the drain hose into 1 of 2 drain hose holes, then fix the end of the drain hose
tightly with a clamp.
4. Pass the drain hose under the refrigerant pipe, keeping the drain hose
tight.
5. Pass the drain hose through the hole in the wall. Check if it slants
downwards as seen in the picture.
Drain hose installation
Drain hose hole
Shield
Drain hose
&YUFOTJPOESBJOIPTF
Summary of Contents for AC444FBRDEH
Page 1: ......
Page 21: ...21 ENGLISH Memo ...
Page 22: ... EEE Yönetmeliğine Uygundur This EEE is compliant with RoHS ...
