Studio GT
Owner’s Manual
15
INSTALLING THE STUDIO GT
Macintosh OSX
The following example is for setting up the
Studio GT in MAC OS X .
1. Plug in the Studio GT into an available
USB port on your MAC using the sup-
plied USB cable. The MAC will recognize
the USB audio device and automatically
install a universal driver.
2. To select the Studio GT as the computer’s
audio input, open the System Preferences
from the dock or the main Apple Menu
(Figure 11).
3. Next open the Sound preferences (Figure
12).
4. Now, click in the Input tab and select
Samson StudioGT (Figure 13).
5. Next, click in the Output tab and select
Samson StudioGT. You may notice that
the Volume slider sets itself to the full
level. This will allow you to have full range
using Studio GT’s hardware Volume con-
trol (Figure 14).
At this point you can begin using your studio
monitors with most any audio recording soft-
ware, but you need to select it as an input and
output device within the DAW. When selecting
the inputs and outputs just look for and select
the Samson StudioGT.
Plug and Play - Some MAC OS DAW’s, like
Apple’s Garage band, will let you plug and
play without going to the Sound preference
set up. When you plug the Studio GT into the
USB port you’ll see a dialog box that will ask
you if you want to select Samson StudioGT.
Select yes and you’re ready to go.
Figure 12
Figure 11
Figure 13
Figure 14