Studio GT
Owner’s Manual
4
STUDIO GT REAR PANEL LAYOUT
1.
1/8” AUX INPUT –
3.5mm stereo input jack for connecting a second line level signal
source, like an MP3 player. This input is not sent through the USB output.
2.
RCA INPUT
– Used to connect signals from unbalanced, –10dBV devices, like a
mixer. The Red connector is for the Right input and the White is for the Left input.
3.
USB Connector
– Connect the supplied USB cable to this rear panel USB “B”
connector.
4.
LEFT SPEAKER OUTPUT
– Push Terminals for connecting the Left-side Extension
Speaker.
5.
POWER SWITCH
– Main power switch. When set to the ON position, the front
panel green LED illuminates indicating the Studio GT is powered up and ready for
operation.
6.
AC INLET
- Connect the supplied IEC power cable here.
7.
TERMINAL CUP
– Push Terminals for connecting the Left-side Extension Speaker to
the Active (Right-side) speaker.
8.
TUNED PORT
- Quiet port design offering linear extended low frequency response.
4
3
1
2
5
6
7
8