Studio GT
Owner’s Manual
7
STUDIO GT QUICK START
RECORDING A GUITAR
1. Turn the GAIN knob fully counter-clockwise.
2. Connect a guitar to the ¼” INPUT on the front panel using a standard ¼” instrument
cable.
Note: The ¼” INPUT can accept either a high impedance or low impedance soure.
3. While playing guitar at its loudest level, slowly turn the GAIN knob clockwise until
the CLIP indicator turns on. Then turn the knob counter-clockwise until the clip
indicator no longer illuminates.
4.
Now raise the LEVEL control knob until you reach a comfortable listening level.
5. In your DAW, select the Studio GT LEFT INPUT as the input source for a mono track.
6.
Set the STEREO/MONO switch to the MONO position, to hear the input out of both
speakers.
7.
If recording two guitars, create two mono tracks in your DAW and select the Studio
GT LEFT INPUT for the left front panel input, and the Studio GT RIGHT INPUT for the
right front panel input.