Samson Media 6, Original Instructions Manual, Page: 35 / 40

EB 9527-2 EN 35
Data exchange
Menu bar [Device]
[User level]
Enter 'Basic calibration'. The user level is password-protected (GRUNDABGLEICH).
4 Data exchange
Detailed information can be found in ? (Help) on the toolbar in
u
EB 9527-3 and
u
EB 6661.
Note:
The most recent product documentation is available on the SAMSON website
u
www.samson.de.
To establish communication, the serial interface of the computer or notebook must be con -
nected to the serial interface port of the Media 6 device using the SAMSON connecting ca -
ble.
TROVIS-VIEW 4 must be in the online mode. In this case, communication is established per
-
manently between the Media 6 device and TROVIS-VIEW. All the configuration and operat -
ing data are transferred cyclically from the Media 6 device and displayed in TRO -
VIS-VIEW 4. Settings made in TROVIS-VIEW 4 are immediately transferred to the Media 6
device.
The SAMSON memory pen can also be used to exchange data between TROVIS-VIEW 4
and the Media 6 device.
Save data to the Media 6 device
Click on on the toolbar: data is saved to the Media 6 device.
4.1 Read data from the Media 6 device to TROVIS VIEW 4
Menu bar [Device]
[Read]
All data of the connected Media 6 device are transferred to the software. This allows the da -
ta to be read or to create a new set of data.
