Samson 3767, Translation Of Original Instructions

Page: 71 / 112

EB 8355-2 EN 11-1
Removal
11 Removal
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
Risk of fatal injury due to the ignition of an
explosive atmosphere.
Î
Observe EN 60079-14 (VDE 0165,
Part 1) for work on the positioner in haz
-
ardous areas.
Î
Work in hazardous areas must only be
performed by personnel who has under-
gone special training or instructions or
who is authorized to work on explo-
sion-protected devices in hazardous ar-
eas.
Î
Put the positioner out of operation (see
the 'Decommissioning' section).
Î
Disconnect the wires for electrical input
and remove them from the positioner.
Î
Unscrew screw fittings for supply pres -
sure/output at the positioner.
Î
To remove the positioner, loosen the fas-
tening screws on the positioner.
DANGER !