3
R. 08/21 816 809
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
2021_08_31-08:30
EN
GENERAL SAFETY WARNINGS
SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGER
• Recharge only with the charger provided by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk
of fire when used with another battery pack.
• Use power tools only with specifically designated battery packs. Use of
any other battery packs may create a risk of injury and fire.
• Rarely, under abusive conditions, liquid may spill from the battery;
avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid spilled from the
battery may cause irritation or burns.
• Have your power tool serviced by a qualified technical service using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
• Although not continuously, portable grease power tools can generate
pressures up to 10,000 psi (700 bar) in certain situations. During the
operation always use gloves and eye protection. Keep your hands away
from the grease nipple.
• Some components of the tool or the hose may break due to high
pressure and may cause a risk of serious injury. Before use, always
inspect the tool and the flexible hose to identify possible damage or
wear. Never use the tool if any of its parts is damaged or worn.
• High pressure can cause damage to the hose or nozzle grease supply.
Use only appropriate grease hoses for use with this tool and follow its
instructions for use and safety warnings.
• Suitable for general split battery pack.
• Do not charge or use batteries in explosive atmospheres, such as
presence of flammable liquids, gases or powders. Inserting or removing
the battery unit from the charger may cause gases or dust to ignite.
• Use only the charger supplied with the tool. This charger has been
specially designed for Lithium-Ion batteries used with this tool.
• Do not charge a damaged battery, replace it immediately.
• Do not store batteries in places where the temperature
can exceed 40ºC.
• Charge the battery only at room temperature between 10ºC and 40ºC
(50ºF and 104ºF).
• Do not charge batteries in wet or damp environments.
• Perform selective collection when disposing of battery packs. This
product should not be disposed with other household waste.
• Do not expose a battery or a battery-powered tool to fire or excessive
temperature. Exposure to fire or temperatures above 130°C (265ºF)
may cause an explosion.
• Do not use the provided batteries with other tools.
• The battery charger is intended for indoor use only.
• Use the provided charger to charge only the batteries supplied.
• Do not expose the charger to rain, snow or ice.
BATTERY USE AND CARE
SERVICE
ADDITIONAL SAFETY WARNINGS
• Do not use a battery pack or tool that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
• Follow all charging instructions and do not charge the battery pack or
tool outside the temperature range specified in the instructions.
Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
• Never service damaged battery packs. Service of battery packs should
only be performed by the manufacturer or authorized service providers.
• The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool
is used. Factor that can affect this value are: how the tool is used, the
tool being in good condition and well maintained, use of the correct
accessories in good condition, tightness of the grip on the handles, the
tool being used as intended by its design and these instructions, and if
any anti vibration accessories are used.
• This tool may cause hand-arm vibration syndrome if its use is not
adequately managed. To be accurate, an estimation of exposure level
in the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is witched off and
when it is running idle but not actually doing the job.
• Do not abuse the power cable of the battery charger. Keep cable away
from heat, oil, sharp edges or moving parts. The cables damaged or
tangled increase the risk of electric shock.
• The charger plug must match the socket power. Never modify the plug
in any way. Plugs not modified and matching sockets will reduce the
risk of electric shock.
• Do not use the charger if the cable or plug is damaged. Never try to
repair the cable or plug.
• Never try to disassemble the battery charger.
• Do not cover the charger or battery while charging.
• Do not use the charger with other batteries.
• When battery pack is not in use, keep it away from other metal objects
such as paper clips, coins, keys, nails, screws or other small metal
objects that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
Only for EU countries:
• Useless power tools as well as damaged or worn out batteries must be
collected separately to be subject to ecological recycling according to
the European Directives 2012/19/EU and 2006/66/EC, respectively.
