SAMIX ES500 Instruction Manual Download Page 43 | Manualshive

Page: 43 / 50

SAMIX ES500 Instruction Manual Download Page 43

43

SAMIX GmbH

Maintenance, repair and cleaning

7.3

Cleaning

WARNING

Electrical hazard from direct contact with live parts!
Always remove the connector from the socket before cleaning the SAMIX

®

ES500.

ATTENTION

Risk of material damage!
Do not open the housing of the SAMIX

®

ES500 without authorization.

Do not use any aggressive cleaning substances or abrasive cleaners for cleaning.
Ensure that no liquid enters the device. If liquid ends up in the inside of the SAMIX

®

ES500,

disconnect the device from the power supply and inform customer service.

Proceed as follows for daily cleaning of the device:
1. Disconnect the connector from the socket.
2. Wipe the surfaces of the device using a damp cloth (wet with mild soapy water).
3. Dry the surfaces of the device using a soft, dry cloth.

NOTICE

To disinfect, you can spray the display of the SAMIX

®

ES500 using a suitable cleaning agent

(for e.g. containing 70% isopropyl alcohol) and wipe.

«
...
41
42
43
44
45
...
»

Summary of Contents for ES500



















































Reviews:

No comments