Doc.-ID: 181210-PT10BA-ES-RoughCam IPM3016_en_rev.00.docx, page 8 of 24
suitable for offshore applications (see general
specification of stainless steell MNo.:1.4404 /
AISI316L), surface finish and modification of the
Ex d housing
1
, elastomer sealings of the ca-
bles, as well as the GYLON flat seals of the
housing flange, etc.)
3
Safety guidelines
Please observe the national regulations regarding security and accident prevention
and the safety guidelines given below in this user manual!
Attention!
Only original parts of SAMCON Prozessleittechnik GmbH may be used
for repairs. Repairs only be carried out in accordance with the nationally
applied regulations and by SAMCON Prozessleittechnik GmbH.
Attention!
External heat and/ or cooling sources are to be taken into account dur-
ing the setting up. The permissible temperature range for transporta-
tion, storage, and operation of the camera has to be observed
Prior to the first use, you should test the camera corresponding to the instructions
given in the chapter Commissioning.
1 Protective coating,
electro polishing, etc. …
