Doc.-ID: 190314-PT08BA-ES-ExCam XF-P1367_EN_rev.00.docx, Page 26 of 32
7
Settings of the lens
The ExCam XF P1367 lens can be set up only via the web interface or the visualization
software. The user cannot do any mechanical settings on at remote zoom lens. To con-
figure the focus and tele-range, you can use the control function (slider) via the web inter-
face and mouse command (see Fig. 7-1).
Fig. 7-1. User Interface for setting the zoom and focus
This step is only necessary if the camera factory settings are unsatisfactory, or if user
settings (focus, sharpness, digital zoom, etc.) to be done via the web interface do not al-
low the user to achieve the desired results.
P 1367
Lens type
Varifocal, IR-corrected, CS-mount, mega-pixel
Iris control
ICS iris,
F1.2/ 2.9 mm
aspherical
technology
No
Focal length
2.8
– 8.5 mm
Image angle,
horizontal
98° (wide) - 36° (tele)
Control
characteristic
(iris)
automatic
(the camera module contains an analogue circuit)
MOD
(min. object
distance)
0.30 m (wide)
1.00 m (tele)
Tab.7-1 Lens Data
Please note!
If not agreed otherwise, the ExCam
®
XF P1367 is pre-configured by the
manufacturer to the maximum sensor resolution and low image com-
pression (high image quality and high network bandwidth). The focus
is optimized for objects at approximately 10 metres distance.
