Doc.-ID: 190314-PT08BA-ES-ExCam XF-P1367_EN_rev.00.docx, Page 6 of 32
2.4
Video-technical characteristics
We use the AXIS P1367 network camera in a pressure-resistant enclosure. For details,
please refer to the Product Documentation, video-technical data of AXIS
®
:
https://www.axis.com/products/axis-p1367
2.5
Other technical data
Camera (Ex-d)
Permissible ambient temperature
0°C … +60°C (for PoE power supply)
-
60°C … +60°C (for 24 V DC power supply)
Protection class as per EN
60529/IEC 529
IP68 (test conditions: 24h/3m water column 5°C°)
Housing material
Stainless steel, mat. no. 1.4404
Weight
About 8.0 kg
Dimensions
D113mm x 310mm
Tab. 2-1. Other technical data
3
Safety Instructions
Please absolutely observe the safety directions stated
in the Ex-installation instructions of the T08 ExCam series!
Quick link:
It is absolutely mandatory to observe the national safety regulations and regula-tions
for prevention of accidents, as well as the safety instructions given below in this User
Manual!
Attention!
Cameras of the type T08 ExCam are not suitable for use in zone 0 and
zone 20. The ambient temperature, temperature class and explosion
group as stated on type plate must be observed! Alterations are not per-
mitted! The camera is to be operated in sound conditions and in the in-
tended way.
Attention!
Only original parts of SAMCON Prozessleittechnik GmbH may be used for
repairs. Repairs concerning the explosion protection may only be carried
out in accordance with the nationally applied regulations and by
SAMCON Prozessleittechnik GmbH.
