-
- 47 -
o
When creating a conference template on the master MCU, add the E.164
number of the conference in slave MCU into its participant list.
Method two:
o
After a non-cascade conference created on the master MCU, call the E.164
number of a slave MCU’s conference just as call a MT into the conferenc
e.
4.2 Combined Cascade
Combined cascading MCUs are all Samcen’s MCU. Both the MTs of the master
MCUs and slave MCUs can be viewed by MCU.
Characteristics
o
Increase in the number of participating terminals, each slave MCU occupies a
channel to transmit data;
o
Facilitate management, each participating MT is authorized by a specified
MCU.
o
A MCU can control MTs of its slave MCUs.
How to hold combined cascade conference
Preparation:
To hold a combined cascade conference, the Accept Conf Cascade Call option
should be selected both in the conference templates of all combined MCUs.
Method:
The creating method for the combined cascade conference is the same as that for
the simple cascade conference.
Operations can be carried out in combined conference
o
The master MCU can conduct control over all participating MTs in the
directly-connected slave MCU, such as, adding, deleting, calling, hanging up,
camera RC, and vide source switching.
o
The chairman in each MCU can only control the MTs under the local MCU,
and cannot control MTs in a different level of MCU.
o
The system supports the master MCU to designate any MT under the
directly-connected slave MCU to become the speaker of a conference.
o
Each MCU can view MTs of master MCU, slave MCU and its own, adjacent
MCUs cannot view MTs of each other.
