-
- 23 -
displayed;
O
View: This list shows View MT, Viewed MT and View Type;
O
Send Back: The list shows the Send Back MT on Lower Level MCU, it is
available only in Combined Cascade Conference (See Part III, section 4.2).
6 MCC-Templates Management
SCS8000E can store up to 128 templates, use MCC to manage template reflected
in the following:
O
Create template
O
Modify template
O
Delete template
.
6.1 Create Template
Go to Conf Mgt > Templates, click Create to fulfill the template information.
Template information in the following table:
General Info
Parameters
Introductions
name Conf
Enter the conference name which is indispensable.
E.164 ID
Enter conference ID here, normally, E.164 ID are assigned by your system
administrator. The E.164 ID can not be the same in a GK. If the MCU and
MTs are registered in the same GK or adjacent GKs, the MT can call the
E.164 ID of the MCU to start a conference or join in a conference.
Conf Rate
The default value is 256Kbps.
Max Time
Terminate manually or set the duration time, “0 Hour 0 Minute” indicates no
time limit to the conference.
General Info—Advanced Info
Control Mode
If Need Password is selected, a password has to be entered
for verification before other MCC to operate the conference,
set password below; but no password is needed for local MCC
operation.
Open Mode
Full Open: Any MT can participate in the conference without
verification;
By Password: Password verification is required before MTs
joining the conference;
Not Open: Only MTs invited to the conference can participate
into the conference.
Security
Settings
