Samcen SCS8000E, Administrator'S Manual, Page: 19 / 65

- - 11 -
3
）
Click the <Login> button.
If you want to hang up the connection of MCC and the MCU, click
button; to reconnect the MCU click button.
Note: If the SCS8000E has been configured several IP addresses, the MCC can type
any one of these addresses to login the SCS8000E. But this situation is not available when
the SCS8000E was deployed in LAN and the MCC was deployed in WAN.
1.2.4 Reboot and Shut down the SCS8000E
When the MCC has connected to the SCS8000E, reboot it refer to these ways:
o
Click button to reboot the SCS8000E. Shutdown the SCS8000E:
o
Click button to shutdown the SCS8000E.
Note: Super administrator or administrator has the right to execute the Reboot and
Shutdown operations. For more information on MCC user, see section two User
Management.
2 MCC-Setup Wizard
The initial use of MCU, we suggest that you log on MCC firstly to configure the
basic information of the MCU.
Usage of MCC
Select MCU Mgt > Setup Wizard;
Pop-up setup wizard interface, then you can select the following steps:
O
General information configuration;
O
Backup MCU settings information into local computer;
O
Load MCU settings information from local computer.