-
- 36 -
Click < Upgrade MCU> can upgrade SCS8000E, for detailed operation, please
refer to the section three of Version Upgrade.
Click <MCU License > to import the MCU license file. If you have not authorized
license file, you can through automatically generate the MCU message to get the
file.
8.2 Peripheral Status
Go to MCU Mgt > Peripheral, can view the MCU has enabled currently
peripherals’ basic information.
Select a peripheral you can view the online status of the peripheral and more
information.
In this interface displays the statuses of “CP Unit”, “Mixer”, “BAS”, “PRS”, “Private
proxy of Samcen”, “GK”, “H.460 Server” and “Data Conference Server”.
The upper half field shows the peripheral list, including the information of
Equipment name, Online, and so on. Select a peripheral (such as Mixer), the
detailed equipment information will be displayed in the lower half field of the
interface.
8.3 MCU Settings
The MCU Settings is used to complete such configurations as LAN, Qos, CP, and
other settings.
Go to MCU Mgt > MCU Settings to setup MCU.
8.3.1 LAN Settings
In LAN interface to configure the network information:
The System’s Deployment: Display the network deployment and the proxy.
Adapter Name: Shows the NIC that is being used, if there are several adapters ,
you can select the one you want to use. Then the information of MCU Address,
Subnet Mask and Gateway is just the adapter’s corresponding information what
you have configured. You can modify the configured information.
Data Recv. Port: The range is 61000-64255. Default value is 61000, and the best
use of the default value.
H225/H245 Start Port: The range is 60002-65279. Default value is 60002, and
the best use of the default value.
Private proxy start port: The range is 48000-49720. Default value is 48011. Or
H.460 server start port: The range is 48000-49720. Default value is 48011.
