Operator's manual
Tractor sweeper
MOP
- 15 -
8)
Install three-way distributor (it. 17) with bolts M6x50 (2 pcs), re-tighten hoses from side
brush motor (it. 21, 22) and other hydraulic hoses (it. 24) – and main supply hose (it. 23).
Note: motor hose II (it. 23) is to replace the original supply hose being available as the
sweeper equipment. Dismount and replace hydraulic plug to the new supply hose.
Fig. 15. Sequence of operations when installing the side brush
Prior to operation commencement:
Grease lubrication points with a solid grease,
Inspect, and if need be, re-tighten bolts and nuts,
Examine connections of hydraulic hoses,
Power on hydraulics and check operation direction of the brushes. When standing by the
sweeper, facing the installed side brush, two brushes should rotate leftwards (Fig. 16).
2
3
1
4
5
6
7
