Operator's manual
Arm
Flail head
- 54 -
Fig. 69. WPT linkage after machine is detached from tractor
6.6.4. Storing
Detached machine should be stored in standstill position, so it is supported onto supporting legs
and the cutterbar (Fig. 70). It is recommended to store the set on paved ground, preferably in roofed
places, inaccessible to unauthorized personnel or animals.
After storing for winter period prior to the machine operation, its technical condition should be
examined and special attention should be paid to the hydraulics and the drive. Paintwork should be
complemented, hydraulic hoses checked and lubricated.
Fig. 70. Correct machine storage position: a) KWT, Camel, b) KOLIBER
CAUTION:
When performing repair and maintenance works the machine should be lowered
onto the ground or supported (cutterbar) onto supports ensuring its full stability,
with the tractor's engine disconnected
and ignition key off.
CAUTION:
Storing the machine otherwise as given, may result in machine instability and
thus its damage
.
